Open as PDF
TOLL FREE: 1-800-798-7398
AFTER USE AND STORAGE
1 If you are also done cleaning, unplug
the cord from the outlet and place the
Handheld Scrubber on a ﬂat surface.
Let the unit cool for 2-3 minutes.
2 Empty the water tank before
storage. Remove the water tank cap
and empty the tank over a sink.
Replace the water cap. (ﬁg. 10)
Care of Your Portable Steam Pocket
CARE OF YOUR MICRO-FIBER
1 We recommend washing your
micro-ﬁber cleaning pad separately
from other fabrics to avoid picking
up lint. Only use liquid detergent
(no powder detergent). Don’t use
any fabric softeners or bleach. Line
dry or dry on a low dryer setting.
2 If there are loose threads on the
micro-ﬁber cleaning pad carefully
cut the thread with scissors. Don’t
pull on them or cut at the base.
IMPORTANT: The micro-ﬁber
cleaning pad may be very hot
from the steam. Use caution when
removing. Let the unit cool for 2-3
CLEANING THE NOZZLE
1 Your Portable Steam Pocket® should
not normally require cleaning,
however, should you notice a
decrease in the steam output, it may
be necessary to remove mineral
deposits built up around the nozzles.
2 Unplug the cleaner from the
3 Use the provided nozzle cleaner or a
small diameter stiff metal wire, such
as a straightened metal paperclip,
and carefully insert the end of the
wire into the nozzle oriﬁce. See
illustration above. (ﬁg. 12)
4 Move the wire back and forth several
times to remove any deposits.
5 Plug in the appliance to the power
outlet and test steam output.