Filter
Top Products
8
Putting the bodypack transmitter into operation
Putting the bodypack
transmitter into operation
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use
two 1.5 V AA size batteries or the rechargeable Sennheiser
BA 2015 accupack (see “Accessories and spare parts” on
page 30).
̈ Open the battery compartment by pushing the two
catches ¸ in the direction of the arrows and open the
cover µ.
̈ Insert the two batteries or the accupack as shown
above. Please observe correct polarity when inserting
the batteries/accupack.
̈ Close the battery compartment.
The battery compartment cover µ locks into place with
an audible click.
Charging the accupack
To charge the bodypack transmitter with the BA 2015
accupack (see “Accessories and spare parts” on page 30)
installed:
̈ Insert the bodypack transmitter into the L 2015 charger
(see “Accessories and spare parts” on page 30).
Connecting the microphone cable/
instrument cable
The audio input is designed for the connection of both
condenser microphones and instruments (e.g. guitars).
DC powering of the condenser microphones is via the audio
input (3.5 mm jack socket MIC/LINE ³).
The L 2015 charger can only charge the combination
BA 2015 accupack/bodypack transmitter. Standard
batteries (primary cells) or individual rechargeable
battery cells cannot be charged in this way.
²
²
µ
µ
¸