Sennheiser SK 100 Pacemaker User Manual


 
21
Adjusting settings via the operating menu
The following figures are a guide to the best settings:
Selecting the frequency bank and the channel manually –
“Frequency Preset”
Overview of the frequency banks and channels:
Transmission situation Sensitivity setting
Loud music/vocals 30 to 21 dB
Presentations 21 to 0 dB
Instrument input
Electric guitars with
single coil pickups
30 to 24 dB
Electric guitars with
humbucker pickups
45 to 30 dB
Guitars with active elec-
tronics (active pickups,
active EQs, piezo pickups)
45 to 30 dB
When you are in the “Frequency Preset” menu item,
the RF signal is deactivated.
Frequency
bank
Channels Type
1” to “20 up to 12 per
frequency
bank
System bank:
frequencies are factory-
preset
U up to 12 User bank:
frequencies are freely
selectable
When setting up multi-channel systems, please
observe the following:
Only the factory-preset frequencies within one
frequency bank are intermodulation-free (see
page 26).
Bodypack transmitter and receiver of a transmission
link have to be set to the same frequency.
̈ It is vital to observe the notes on frequency
selection on page 26.
Menu
B.Ch:
1. 1
Frequency Preset
B.Ch:
MHz
Frequency Preset
1. 1
B.Ch:
MHz
Frequency Preset
20. 1
“Stored”
518.200 533.875
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
SET
SET
SET