Filter
Top Products
13
Using the bodypack transmitter
The lock mode icon ቦ flashes prior to the lock mode being
activated again.
Muting the audio signal or deactivating the
RF signal
The MUTE switch · allows you to mute the audio signal or
to deactivate the RF signal.
Via the “Mute Mode” menu item, you can set the desired
function of the MUTE switch · (see page 24):
̈ From the “Mute Mode” menu item, select the desired
setting (see page 24).
̈ Exit the operating menu.
̈ Slide the MUTE switch MUTE · to the left, to the
position MUTE.
The bodypack transmitter reacts as indicated in the
table.
̈ Press the SET button.
The lock mode is temporarily deactivated.
How you are using the bodypack transmitter
determines how long the lock mode remains
deactivated:
Setting
Slide the MUTE
switch · ...
Function
“AF On/Off” ... to the left
(position MUTE)
Mutes the audio signal
... to the right Unmutes the audio
signal
“RF On/Off” ... to the left
(position MUTE)
Deactivates the RF
signal
(offline operation)
... to the right Activates the RF signal
(online operation)
“Disabled” No function
When you are in the operating menu
The lock mode remains deactivated until you
exit the operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after
10 seconds.
MHz
533.875
ew100 G3
MUTE
P
AF
ቦ
·