Filter
Top Products
40
www.pridemobility.com Celebrity X
IX. CARE AND MAINTENANCE
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tires and
you have a flat tire, you can have the tube replaced.
If your scooter is equipped with a solid tire insert,
either the solid insert or the entire wheel must be
replaced depending on the model. Contact your
authorized Pride Provider for information regarding
replacement wheels for your scooter.
WARNING! Wheels on your scooter
should only be serviced/replaced by
an authorized Pride Provider or
qualified technician.
WARNING! Be sure that the key is
removed from the key switch and the
scooter is not in freewheel mode
before performing this procedure.
Follow these easy steps for a quick and safe repair
for solid tires:
1. Remove the key from the key switch.
2. Elevate the side of the scooter of which you are
removing the tire. Place wooden blocks under the
frame to elevate the scooter.
3. Remove the drive wheel nut and washer from the
axle. See figure 25.
4. Pull the wheel off the axle.
5. Slide the new wheel back onto the axle. Make sure
that the axle key is in the axle slot. See figure 25.
WARNING! Failure to ensure that the
axle key is properly installed into
the axle slot when mounting the
wheel can result in electronic brake
failure, personal injury, and/or
product damage.
6. Reinstall the drive wheel nut and washer onto the
axle and tighten.
WARNING! Make sure both the nut
and washer are reinstalled and
tightened properly.
7. Remove the block from beneath the scooter.
Figure 25. Solid Tire Wheel Removal
AXLE KEY
DRIVE WHEEL WASHER
DRIVE WHEEL
NUT
WHEEL CAP
AXLE SLOT