Filter
Top Products
33
Celebrity X www.pridemobility.com
VI. COMFORT ADJUSTMENTS
Figure 19. Positioning Belt
POSITIONING BELT (OPTIONAL)
Your scooter seat may be equipped with an auto-type posi-
tioning belt that can be adjusted for operator comfort. See
figure 19. The positioning belt is designed to help support
the operator so that he/she does not slide down or forward
in the seat. The positioning belt is not designed for use as
a restraining device.
To install the positioning belt (if required):
1. Remove the seat from your scooter.
2. Place the seat upside down so that you can see the bot-
tom of the seat base.
3. Remove the two bolts on the outermost part of the rear
seat mounting strap.
4. Insert the bolt through the appropriate end of the posi-
tioning belt and then through the seat mounting strap
for each side of the scooter seat.
5. Tighten the bolts.
To adjust the positioning belt for operator comfort:
1. Insert the metal tab on the right side of the belt into the
plastic housing on the opposite strap until you hear a
“click.”
2. Pull the strap on the right side of the belt until it is
secure, but not so tight as to cause discomfort.
To release the positioning belt:
1. Press the push button mechanism on the plastic housing.
MANDATORY! Make sure the positioning
belt is properly secured to the scooter and
is adjusted for operator comfort.
MANDATORY! Inspect the positioning belt
for loose or damaged parts before each
use of the scooter. If you discover a
problem, contact your authorized Pride
Provider for maintenance and repair.