Pride Mobility SC4001 Mobility Aid User Manual


 
20
www.pridemobility.com Celebrity X
III. YOUR SCOOTER
Lights Switch
This switch controls your scooter’s lights.
Toggle the switch forward to turn on your scooter’s front top light and running lights.
Toggle the switch to the middle to turn off the scooter’s lights.
Toggle the switch rearward to turn on all the scooters lights (upper, lower front, and running lights).
WARNING! Scooter users are required to use their lights when visibility is restricted—day
or night.
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maxi-
mum speed you preset with the speed adjustment dial.
To Move Forward use either of the following:
Use your left thumb to push the left side of the throttle control lever.
Use your right hand fingers to pull back on the right side of the throttle control lever.
To Move Rearward use either of the following:
Use your right thumb to push the right side of the throttle control lever.
Use your left hand fingers to pull back on the left side of the throttle control lever.
Release the throttle control lever and allow your scooter to come to a complete stop before engaging the
other side of the lever. When the throttle control lever is completely released, it automatically returns to
the center “stop” position and engages your scooter’s brakes.
Speed Adjustment Dial
This dial allows you to preselect and limit your scooter’s top speed.
The image of the tortoise represents the slowest speed setting.
The image of the hare represents the fastest speed setting.
Figure 6. Off-board Charger Port
Off-board Charger Port
The off-board charger power cord plugs into this port when
charging the batteries. See figure 6.
Tiller Console Fuses
These fuses help protect your scooter’s front lighting, turn sig-
nals, and key switch console systems from receiving an over-
load of electrical current. The fuses used in your scooter are
the same type used in automobiles. See figure 7. See IX.
“Care and Maintenance” for fuse replacement.