Filter
Top Products
20 www.pridemobility.com Jet 7
DISASSEMBLY
Your power chair disassembles into eight easily transportable component assemblies with no tools required. See figure 12.
Place the power chair in an area where there is ample space to work and move around the unit—three or more feet of
clearance on all sides. Make sure the unit is powered off before disassembling the chair.
WARNING! Even though no tools are required to disassemble or assemble your power chair, you
should take care not to place your hands or fingers on the areas of the component assemblies
where they may be pinched, as the assemblies “snap” together or “snap” apart.
WARNING! Some power chair components are heavy. You may need assistance to lift or carry
them. Please refer to the specifications table for specific component weights before you
disassemble the power chair.
NOTE: During both the disassembly and the assembly of your power chair, you may find it helpful to engage
the drive motors to secure the unit from rolling. See III. “Your Power Chair.”
FOOTREST
SEAT
BATTERY BOXES
BATTERY WELL FRAME
FRONT FRAME
Figure 12. The Jet 7 Component Assemblies
RIGHT POWER BASE
FRAME ASSEMBLY
LEFT POWER BASE
FRAME ASSEMBLY
V. DISASSEMBLY
TRAPEZE BARS