Pride Mobility Jet10Ultra Mobility Aid User Manual


 
20 www.pridemobility.com Jet 10 Ultra/RevA/Apr04
MANUAL FREEWHEEL LEVERS
The Jet 10 Ultra has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the drive
motors from the gearboxes and maneuver the chair manually.
WARNING! Do not use the power chair while the drive motors are disengaged! Do not disengage
the drive motors when the power chair is on an incline, as the unit could roll on its own, causing
injury!
To engage or disengage the drive motors:
1. Locate the lever on top of each motor.
2. Push the two levers inward to engage the drive motors. See figure 7.
3. Pull the two levers outward to disengage the drive motors. See figure 8.
If a lever is difficult to move in either direction, slightly rock the power chair back and forth. The lever should then move
to the desired position.
WARNING! It is important to remember that when your power chair is in freewheel mode, the
braking system is disengaged.
IV. THE JET 10 ULTRA
Figure 8. Freewheel Mode (Drive Disengaged)Figure 7. Drive Mode (Drive Engaged)
MANUAL FREEWHEEL LEVER