Filter
Top Products
18 www.pridemobility.com Jazzy Select 14 Series
III. YOUR POWER CHAIR
Electrical Components
The electrical components are located on or inside the power base. The controller connector and circuit breaker
are located on the electronics tray. The power module is located inside the power base. See figure 6.
Controller Connector: This is where the controller connects to the power base. Each controller uses a different
type of harness. Regardless of which type of controller is used, the harness must be secured to the seat assembly
and not allowed to drag on the floor.
Main Circuit Breaker: The main circuit breaker is a safety feature built into your power chair. When the batteries
and motors are heavily strained (e.g., from excessive loads), the main circuit breaker will trip to prevent damage
to the motors and the electronics. If the circuit trips, allow your power chair to “rest” for approximately one
minute. Then, push in the circuit breaker button, turn on the controller power, and continue normal operation. If
the main circuit breaker continues to trip repeatedly, contact your authorized Pride Provider.
CONTROLLER CONNECTOR
MAIN CIRCUIT BREAKER
Figure 6. Jazzy Select 14 Series Electronic Components