Filter
Top Products
26 www.pridemobility.com Quantum Jazzy 1650 Series
Controller Position
You can move the controller in toward or out away
from the armrest, or change the position of the control-
ler for either left-hand or right-hand use. See figure 14.
WARNING! Do not place the controller
harness so that it can be pinched in
the seat frame or the power base
frame.
To change the controller position:
1. Turn off the power to the controller.
2. Unplug the controller harness from the power base.
3. Remove any wire ties securing the controller har-
ness to the armrest.
4. Loosen the mounting screws in the controller
mounting block. See figure 14.
5. Slide the controller mounting block off of the arm-
rest.
6. Reinstall the controller mounting block onto the
other armrest.
7. Tighten the mounting screws.
8. Secure the controller harness to the armrest with
wire ties.
9. Plug the controller harness back into the power
base.
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different
heights in 0.5-in. (1.27-cm) increments.
To raise or lower the foot platform:
1. Remove the hardware from the foot platform
bracket. See figure 15.
2. Raise or lower the foot platform to the desired
height.
3. Reinstall the hardware into the foot platform
bracket and tighten.
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a hex
key. See figure 15.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the setscrews.
2. Turn the setscrews to raise or lower the front of the
foot platform.
V. COMFORT ADJUSTMENTS
Figure 15. Foot Platform Adjustment
SETSCREWS
Figure 14. Controller Mounting Block
SETSCREWS
MOUNTING SCREWS
FOOT PLATFORM
BRACKET