Filter
Top Products
Quantum Jazzy 1650 Series www.pridemobility.com 25
DETENT BAR
BUTTON HEAD
CAP SCREWS
ARMREST LOCK
ARMREST
LOCK LEVER
ARMREST
LOCK
V. COMFORT ADJUSTMENTS
Heavy Duty Drop-in Armrests
The heavy duty drop-in armrests are attached to the
chair with an armrest locking mechanism that is fas-
tened to the side rails of the seat. These armrests can be
removed for easy transfer onto and off of the power
chair. Both the position and the overall height of the
armrests can be adjusted.
To remove the armrest assembly:
1. Rotate the armrest lock lever rearward. See
figure 11.
2. Lift up the armrest assembly.
To install the armrest assembly:
1. Place the armrest assembly into the armrest lock.
See figure 11.
2. Rotate the armrest lock lever forward.
Armrest Position Adjustment
The position of the armrests along the side rails can be
adjusted forward or rearward.
To adjust the armrest position:
1. Remove the armrest from the armrest lock.
2. Loosen the hardware that fasten the armrest lock to
the seat base side rail. See figure 12.
3. Slide the armrest lock forward or rearward along
the seat base side rail.
4. Tighten the armrest lock hardware.
5. Install the armrest in the armrest lock. See
figure 12.
6. If necessary, repeat for the other armrest.
Armrest Height Adjustment
The height of the armrest can be adjusted by sliding the
armrest up or down the detent bar.
To adjust the armrest height:
1. Rotate the armrest lock lever rearward and remove
the armrest from the armrest lock. See figure 13.
2. Remove the hardware from the side of the armrest.
3. Slide the armrest up or down the detent bar to the
desired height.
4. Reinstall the hardware to the side of the armrest.
5. Install the armrest in the armrest lock and rotate the
lock lever forward.
6. If necessary, repeat for the other armrest.
Figure 12. Armrest Position Adjustment
Figure 13. Armrest Height Adjustment
SEAT BASE
SIDE RAIL
FLAT HEAD
SCREWS