Filter
Top Products
Jazzy Select Series www.pridemobility.com 29
Armrest Height Adjustment
To change the armrest height:
1. Loosen the setscrews on the armrest. See figure 19.
2. Raise or lower the armrest to the desired height.
3. Tighten the setscrews to secure the armrest.
Controller Position
You can move the controller in toward or out away
from the armrest, or change the position of the control-
ler for either left-hand or right-hand use.
WARNING! Do not place the controller
harness so that it can be pinched in
the seat frame or the power base
frame.
To extend the controller:
1. Flip up the armrest so it is perpendicular to the floor.
2. Loosen the setscrew on the controller bracket. See
figure 20.
3. Slide the controller into or out of the armrest to the
desired position.
4. Tighten the setscrew to secure the controller.
To change the controller position:
1. Turn off the power to the controller.
2. Unplug the controller harness from the power base.
3. Cut the wire tie(s) that secure the controller harness
to the armrest and seat.
4. Flip up the armrests.
5. Loosen the setscrew on the underside of each
armrest. See figure 20.
6. Slide the controller out of the armrest.
7. Place the controller into the other armrest.
8. Tighten the setscrew to secure the controller.
9. Route the controller harness along the seat frame
and secure with wire ties. See figure 13 or 16.
10. Plug the controller into the power base. See figure
6, 7, or 8.
V. COMFORT ADJUSTMENTS
Figure 20. Underside of Armrest
SETSCREW