Filter
Top Products
34
www.pridemobility.com Celebrity XL
VII. DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
You can disassemble the scooter into seven pieces:
the seat, the front section, the rear section, the rear
shroud, the basket, and the batteries. See figure 20.
No tools are required to disassemble or assemble
your scooter, but keep in mind that the
disassembled sections of the scooter take up more
floor space than when assembled. Always
disassemble or assemble your scooter on a level,
dry surface with sufficient room for you to work
and move around your scooter—about 6.5 feet (2
meters) in all directions. Remember that some
scooter components are heavy and you may need
assistance when lifting them.
WARNING! Do not lift beyond your
1. Place the scooter in drive mode by engaging the freewheel lever.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise
90°. See figure 21. The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when
removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up
on the seat.
4. Gently pull the rear shroud up and off of the rear section of the scooter.
5. Unplug the front-to-rear and rear lighting harnesses by squeezing the sides and pulling straight up. See
figure 22.
6. Unplug both battery harnesses. Pull each harness straight up. See figure 22.
Figure 20. The Scooter Disassembled
SEAT
REAR SHROUD
REAR SECTION
FRONT SECTION
BATTERIES
BASKET
physical capability. Ask for
assistance when necessary while
disassembling or assembling your
scooter.
Figure 21. Tiller Lock Knob (Locked) Figure 21A. Tiller Lock Knob (Unlocked)
UNLOCKED POSITION
LOCKED POSITION