Filter
Top Products
31
Celebrity XL www.pridemobility.com
VI. COMFORT ADJUSTMENTS
Figure 17. Seat Height Adjustment
LOWER SEAT
POST
SEAT HEIGHT
ADJUSTMENT
BOLT
SEAT HEIGHT
ADJUSTMENT
NUT
CLAMP-ACTION
BOLT
NUT
LOCATING
HOLES
UPPER SEAT
POST
SEAT SLIDING LEVER
SEAT ROTATION LEVER
Figure 16A. Seat Adjustment Levers
SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into sev-
eral positions.
1. Push forward on the seat rotation lever to disen-
gage the seat. See figure 16A.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or backward to
adjust the distance between the seat and the tiller.
See figure 16A.
1. Move the seat sliding lever outward.
2. While holding the lever out, slide the seat for-
ward or backward.
3. Release the seat sliding lever once the seat is in
the desired position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights.
See figure 17.
1. Remove the seat and rear shroud from your
scooter. See VII. “Disassembly and Assembly.”
2. Loosen the seat height adjustment nut and
remove it from the bolt. Remove the bolt.
3. Loosen the clamp-action bolt.
4. Raise or lower the upper seat post to the desired
seat height.
5. While holding the upper seat post at that height,
match up the locating holes in the upper seat
post with those of the lower seat post.
6. Insert the seat height adjustment bolt through
the locating holes of both the upper and lower
seat posts.
7. Install the nut onto the bolt and tighten.
8. Tighten the clamp-action bolt.
9. Reinstall the rear shroud and the seat.
To adjust your scooter’s reclining seat, perform these steps. See figure 16.
1. With your back pressed up against the seatback, lift up on the seatback adjustment lever and lean
forward or backward to adjust the seatback angle.
2. Release the seatback adjustment lever once the seat is in a comfortable riding position.