Filter
Top Products
28
www.pridemobility.com Celebrity/RevH/Apr03
TILLER ANGLE ADJUSTMENT
is in motion.
You can adjust the tiller to any number of positions between the
forward stop and the scooter deck.
1. Pull up on the tiller adjustment lever. See figure 12.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever. The tiller remains in that
position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of five different heights.
1. Remove the seat from your Celebrity. See IX. Disassem-
bly and Assembly.
2. Use the attached ring to pull and remove the ball detent pin
from the seat post tower. See figure 13.
3. Raise or lower the seat pedestal to the desired seat height.
4. Hold the seat pedestal at that height and match up the holes
in the seat pedestal and in the seat post tower.
5. Fully insert the ball detent pin.
6. Replace the seat.
FRONT-TO-BACK SEAT ADJUSTMENT
The Celebrity is equipped with a sliding seat that is operated
like an automobile seat. You can reposition the Celebrity’s seat
forward or rearward.
1. Pull out the front-to-back seat release lever. See figure 14.
2. Move the seat forward or rearward.
3. Release the front-to-back seat lever.
SEAT ROTATION
The seat lock lever locks the seat in one of four positions.
1. Push down on the seat lock lever to unlock the seat.
See figure 14.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely in place.
NOTE: In order to lower the tiller to the scooter deck, you
must first remove the seat and both batteries. See IX. Dis-
assembly and Assembly.
BALL DETENT PIN
SEAT PEDESTAL
VIII. COMFORT ADJUSTMENTS
WARNING! Remove the key before adjusting the tiller or seat. Never attempt to adjust the
tiller or seat while the scooter is in motion.
Figure 12. Tiller Adjustment
TILLER ADJUSTMENT LEVER
Figure 13. Seat Height Adjustment
Figure 14. Seat Adjustments
ARMREST ADJUSTMENT KNOBS
SEAT LOCK LEVER
FRONT-TO-BACK SEAT RELEASE LEVER