Pride Mobility INFMANU1208 Mobility Aid User Manual


 
21
Celebrity/RevH/Apr03 www.pridemobility.com
Motor/Transaxle Assembly
The motor/transaxle assembly is the electromechanical unit
that converts the electrical energy of your Celebritys bat-
teries into the controlled mechanical energy that drives the
Celebritys wheels. See figure 9.
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety fea-
ture of your Celebrity. Do not, under any circumstances,
remove the anti-tip wheels from your Celebrity. See figure 9.
WARNING! Do not remove the anti-tip
wheels or modify your scooter in any
way that is not authorized by Pride.
Do not expose the electronic controller assembly to moisture. In the event that the electronic controller assembly
does become exposed to moisture, do not attempt to operate your Celebrity until the assembly has thoroughly dried.
n The main circuit breaker (reset button) is mounted on the electronic controller assembly cover. See figure 8.
n The main circuit breaker reset button pops out when the breaker trips.
n When the breaker trips, the entire electrical system of your Celebrity is shut down.
n Allow a minute or so for your Celebritys electronics to rest.
n Push in the reset button to reset the breaker.
n If the breaker trips frequently, you may need to charge your batteries more often. You may also need to have
your Pride Provider perform a load test on your Celebritys batteries.
n If the main circuit breaker trips repeatedly, see your authorized Pride Provider for service.
Manual Freewheel Lever
V. YOUR CELEBRITY
MANUAL FREE-
WHEEL LEVER
Figure 9. Rear Section
MOTOR/TRANSAXLE
ASSEMBLY
ANTI-TIP WHEEL
ANTI-TIP WHEEL
Whenever you need, or want, to push your Celebrity for short distances, you can put it in manual freewheel mode.
n The manual freewheel lever is located on the end of the motor/transaxle assembly at the right rear of the
Celebrity. See figure 9.
n Pull up on the manual freewheel lever to disable the drive system and the brake system.
n You will then be able to push your Celebrity.
n Push down on the manual freewheel lever to reengage the drive system and the brake system and take your
Celebrity out of freewheel mode.
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
n Disengage the drive motors only on a level surface.
n Ensure the key is removed from the key switch.
n Stand behind the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
n After you have finished pushing your scooter, always return it to the drive mode to lock
the brakes.
Failure to heed the above could result in personal injury and/or damage to your scooter.