Filter
Top Products
33
Hurricane www.pridemobility.com
IX. DISASSEMBLY AND ASSEMBLY
DISASSEMBLY
You can disassemble the PMV into seven pieces: the seat, the front section, the rear section, the rear shroud, the
basket, and the batteries. See figure 14. No tools are required to disassemble or assemble your PMV. Since the
disassembled sections of the PMV take up more floor space than the assembled unit, place the PMV on a level,
dry surface with sufficient room to move the parts around. You will need about five feet in all directions. keep in
mind that you may need assistance to lift some of the PMV components.
1. Place the manual freewheel lever in the drive position.
2. Lift the seat up and off the PMV.
3. Gently pull the shroud up and off of the rear section of
the PMV.
4. Disconnect the battery strap.
5. Unplug both T-handle battery harnesses. See figure 15.
6. Remove the batteries.
7. Unplug the front-to-rear harness. See figure 15.
WARNING! Failure to unplug both T-
handle battery harnesses and the front-
to-rear harness prior to separating the
front and rear sections could result in
permanent damage to the PMV.
WARNING! Lifting weight beyond your physical capability may result in personal injury.
Ask for assistance when necessary while disassembling or assembling your PMV.
SEAT
REAR SHROUD
REAR SECTION
BATTERIES
BASKET
FRONT SECTION
Figure 14. The Hurricane Disassembled
Figure 15. Harness Connections
FRONT-TO-REAR HARNESS
T-HANDLE BATTERY HARNESS
T-HANDLE BATTERY HARNESS