Filter
Top Products
24
www.pridemobility.com Hurricane
VI . BATTERIES AND CHARGING
3. Make certain that the manual freewheel lever is in the
drive position.
4. Plug the 3-pin charger power cord into the off-board
charger port. See figures 9 and 10.
5. Extend the charger power cord and plug it into the
wall outlet.
6. Turn the charger on. See figure 8.
7. When the batteries are fully charged, turn the charger
off and unplug the charger power cord from the wall
outlet and then from the off-board charger port.
The LED lights on the charger indicate different charger
conditions at various times: charger power on, charging in
progress, charging complete. Refer to the label on the
charger for a complete explanation of these indicators.
NOTE: There is a charger inhibit function on your
PMV. The PMV will not run and the battery condi-
tion meter will not operate while the batteries are
charging.
FREQUENTLY ASKED QUESTIONS (FAQS)
How does the charger work?
When your PMV’s battery voltage is low, the charger works
harder, sending more electrical current to the batteries to
bring up their charge. As the batteries approach a full charge,
the charger sends less and less electrical current. When
the batteries are fully charged, the current sent from the
charger is at nearly zero amperage. Therefore, when the
charger is plugged in, it maintains the charge on your PMV’s
batteries, but does not overcharge them. We do not rec-
ommend that you charge your PMV’s batteries for more
than 24 consecutive hours.
Figure 10. Off-Board Charger
I
O
ON/OFF SWITCH
PLUGS INTO THE OFF-BOARD
CHARGER PORT
PLUGS INTO
WALL OUTLET
OFF-BOARD
CHARGER PORT
Figure 9. Off-Board Charger Port