Filter
Top Products
9
STEP 2B
CONFIGURING THE NET350 USING
NET-MANAGER
NOTE: If you do not want to configure PelcoNet using HyperTerminal or NET-
Manager, refer to the PelcoNet NET350 manual (C2907M) for instructions on
configuring PelcoNet using a web browser.
INSTALLING NET-MANAGER
1. Insert the PelcoNet Resource CD in your PC’s CD drive. The PelcoNet
Installation and User Guide appears after a short interval.
2. Click NET350. A list of programs you can install is displayed.
3. Click Install Net-Manager. The NET-Manager Setup Welcome screen
appears.
4. Follow the on-screen installation instructions.
5. Click Finish when you are prompted to complete the installation.
NET-Manager is now installed.
6. Click Back and then click Exit to leave the installation program.
Remove the CD.