Filter
Top Products
3
NET350 BACK
VideoIn
75
AudioI/O
Power
CompactFlash
AlarmI/O
Ethernet Power
LTOI
RECEIVER OR SPECTRA
ᕢ
ᕣ
ᕡ
ᕤ
RX+RX-
COM2:
RS232
COM1:
RS232/422/485
NET350 FRONT
TX+
TX-
4800, 8, NONE, 1
STEP 1A
CONNECTING THE TRANSMITTER —
NET350T
1. Plug in the supplied power adapter to power-up the PelcoNet. Be sure
to use the correct power supply adapter (configure if needed).
2. Attach a camera to the Video In connector.
3. Connect a network cable to the Ethernet port.
4. (Optional) Connect the COM1: RS232/422/485 port with a serial cable
to any controllable devices (for example, Genex
®
multiplexer, System
9760
®
, Spectra
®
dome).