Filter
Top Products
4
STEP 1B
CONNECTING THE RECEIVER —
NET350R
NOTE: Skip this step if a receiver will not be used.
1. Plug in the supplied power adapter to power-up the PelcoNet. Be sure
to use the correct power supply adapter (configure if needed).
2. Attach a monitor to the Video Out connector.
3. Connect a network cable to the Ethernet port.
4. (Optional) Connect the COM1: RS232/422/485 port with a serial cable
to a keyboard (for example, KBD4000, CM9760-KBD, KBD300A).
NET350 BACK
VideoOut
75
AudioI/O
Power
AlarmI/O
Ethernet Power
LTOI
ᕢ
ᕣ
ᕡ
ᕤ
COM2:
RS232
COM1:
RS232/422/485
MONITOR
RX-
RX+
12 VAC
KBD300A
STRAIGHT
CABLE
DIRECT
MODE
1
2
3
4
8
7
6
5
NET350 FRONT
4800, 8, NONE, 1