Filter
Top Products
19
English
Measuring Your Blood Pressure
1. Place the arm to which the device is
attached on top of the storage case with
the wrist positioned at the level of the
heart.
(Please see “Obtaining Accurate
Measurements” on pages 14 and 15.)
2. Press the wrist height button briefly.
Wrist height sensor function will start.
(For wrist height sensor, see pages 16 and
17.)
(Measurement will not start until the Off/On
Start button is pressed.)
Note: Height setting is reset when it is pressed
for 3 seconds or longer.
•
3. Fine adjust the arm angle.
Fine adjust the angle of your arm so the
wrist will be at the appropriate height.
Wrist height sensor lamp will turn on when
your wrist is at an appropriate height.
(Please see pages 16 and 17.)
Wrist height sensor lamp will turn off a
short period while after the measurement
starts.
You can also start measurement by
proceeding to the step “4. Press the
Off/On Start button.” without pressing the
wrist height button. In such a case, both
the blood pressure measurement and
the wrist height sensor function will start
simultaneously.
•
•
•