Filter
Top Products
12
English
Fitting the Pressure Cuff
Blood pressure is measured at your left wrist. It is not necessary to roll up
your sleeve or to remove any clothing.
Fastener
Fastener
Place the device
on the inside of
your wrist.
Wrap the pressure cuff so
that the positioning mark is
aligned with the base of the
wrist.
1. Place the device on the
inside of your wrist.
Place the device directly in
contact with the skin.
The device can be used by
people with a wrist
circumference of 5˝–8-3/4˝
(12.5–22.0 cm).
•
•
Base of the wrist
Wrap the pressure
cuff so that the
positioning mark
will be at the
center of the wrist.
2. Firmly wrap and fasten using
the hoop and loop fastener.
A loosely applied pressure
cuff will result in high blood
readings or incapable
measurement.
Press fastener softly to avoid
the peel off.
•
•