Panasonic EW-BW30 Blood Pressure Monitor User Manual


 
9
English
Inserting/Replacing Batteries
*Always use alkaline batteries. (2 AAA-size LR03 alkaline batteries)
When replacing batteries, always use 2 fresh alkaline batteries
of the same type from the same manufacturer, and replace them
simultaneously.
1. Remove the device from the storage
case.
Insert the batteries.
(1) Slide the battery cover open as shown in
the diagram.
(2) Insert the two batteries making sure that
they are aligned correctly (+/–).
2. Slide the battery cover shut until it clicks.
Replace batteries when:
The “low battery” indicator is displayed.
No display appears even if the Off/On Start
button is pressed.
CAUTION:
Always follow the cautions printed on the batteries.
Check the polarities of the batteries and install them correctly.
Remove exhausted batteries promptly.
If the product will not be used for a long time, remove the batteries.
Batteries should be used before their expiration date.
Use after the expiration date may result in injury or staining of the
surrounding area due to generation of heat, bursting, or leakage.