Filter
Top Products
21
English
Problem Action
The shaving sensor does
not respond.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Depending on the beard thickness,
the shaving sensor may not react
and the driving sound may not
change. This is not abnormal.
The shaving sensor may not
respond depending on the
thickness of the beard or the type
of the shaving gel and shaving
foam, but this is normal.
The shaving sensor
responds even though the
shaver is not in contact
with the skin.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 16.)
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
The shaver cannot be
charged with the self‑
cleaning recharger.
Gently wipe the main body rear
terminals and the charging
terminals of the self‑cleaning
recharger with a cloth or tissue
dampened with water.
Problem Action
Shaver stopped
functioning.
Recommended ambient
temperature for operation is
5 – 35 °C (41 – 95 °F). The
shaver may stop functioning when
out of recommended ambient
temperature range.
The battery has reached the end
of its life.
The driving sound
changes while shaving.
While the shaving sensor lamp
glows, the shaving sensor is
operating. The sound changes
depending on the beard thickness.
The power will not switch
to OFF.
Press the power switch twice
while using in the shaving sensor
mode.
►When the STATUS lamp glows
Problem Action
It is time to replace the
cleaning liquid.
Pour new water and detergent
into the cleaning liquid unit.
The cleaning liquid unit is
not properly attached.
Properly attach the cleaning liquid
unit.
The self‑cleaning
recharger is tilted.
Place the self‑cleaning recharger
on a horizontal surface.
Use the self‑cleaning
recharger outside the
range of the recommended
usage temperature.
Use within the recommended
temperature range of 15 – 35 °C
(59 – 95 °F).
After performing the above operation, press the SELECT button
and select a mode.
ES-LV95_US.indb 21 2013/07/19 9:45:15