Filter
Top Products
12
English
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp ( )
may not glow. It will eventually glow if kept connected.
4
4
Disconnect the adaptor after charging is
completed.
• You can charge even with the STATUS lamp of the self‑cleaning
recharger glowing.
• The appliance can be charged even with the cleaning liquid unit
removed.
Charging without the self-cleaning recharger
You can also charge without the self‑cleaning recharger.
1
1
Insert the appliance plug into
the shaver.
• Turn the shaver off before inserting.
2
2
Plug in the adaptor into a
household outlet.
• Wipe off any water droplets on the
appliance socket.
1
2
3
3
Disconnect the adaptor after charging is
completed.
Note
You cannot operate the shaver while charging.
Using the shaver
1
1
Rotate the lock ring to unlock the power switch.
(See page 11.)
2
2
Press the power switch to select the desired
shaving mode.
• Each time you press the power switch, the shaving mode
changes from “Shaving sensor mode” “Normal mode”
“OFF”.
Shaving
mode
Shaving sensor
mode
Normal mode OFF
Description
Beard thickness
is automatically
sensed and the
power is
automatically
adjusted when
shaving.
The power level
is constantly
maintained
while shaving.
—
Operation
Shaving
sensor lamp
The shaving
sensor lamp
blinks.
—
The shaving
sensor lamp
turns off.
—
The shaving
sensor lamp
turns off.
ES-LV95_US.indb 12 2013/07/19 9:45:09