Filter
Top Products
16
English
Mode Time required (guide)
1 Charge
Charge
0 to 60 min
2 Clean/Dry/
Charge
Clean
10 min
Dry
80 min
(170 min*)
Charge
0 to 60 min
• It is not possible to change the mode after the
“Clean/Dry/Charge” mode has started.
3 Dry/Charge
Dry
180 min
Charge
0 to 60 min
• It is possible to change to the “Clean/Dry/
Charge” mode even after the “Dry/Charge”
mode has started.
* When the ambient temperature of the self‑cleaning recharger is
low (approx. 15 °C (59 °F) or lower), the time it takes to dry the
shaver increases.
• Use the self‑cleaning recharger in temperatures between 15 °C
(59 °F) and 35 °C (95 °F).
• The Clean or Dry function may stop under extreme low
temperatures (approx. 0 °C (32 °F) or lower). In such a case, the
STATUS lamp will glow for approximately 5 seconds and the
mode will switch to the “Charge” mode without allowing you to
select the “Clean/Dry/Charge” mode or the “Dry/Charge” mode.
Cleaning the shaver without the self-cleaning recharger
We recommend that you clean your shaver with the self‑cleaning
recharger or the sonic vibration cleaning mode when the faucet
symbol appears on the lamp display.
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some
water to the system outer foil.
3. Rotate the lock ring to unlock the
power switch.
4. Press the power switch for more than 2
seconds to activate the sonic vibration
cleaning mode.
• The battery capacity lamps blink in
order.
• After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.
5. Remove the outer foil section and
press the power switch for more than 2
seconds to activate the sonic vibration
cleaning mode and clean it with
running water.
6. Wipe off any drops of water with a dry
cloth.
7. Dry the outer foil section and the
shaver completely.
8. Attach the outer foil section to the
shaver.
4
5
7
►Drying the shaver with the self-cleaning recharger
1. Attach the outer foil section to the shaver.
2. Dry the shaver with self‑cleaning recharger using “Dry/Charge”
mode.
ES-LV95_US.indb 16 2013/07/19 9:45:14