Filter
Top Products
18
English
Cleaning the self-cleaning recharger
Beard trimmings may become attached to the cleaning tray of the
self‑cleaning recharger. Follow the steps below to remove them.
We recommend doing this each time you change the cleaning
liquid.
1. Be sure to remove the cleaning liquid unit
and the appliance plug from the self‑
cleaning recharger.
• Be careful not to spill the cleaning liquid.
• Some cleaning liquid components and
skin oil may separate and adhere to the
cleaning liquid unit and cleaning liquid
filter. This does not indicate a problem.
2. Pour water as illustrated while
tilting the cleaning liquid unit
and shaking it gently.
• You can clean with the
cleaning liquid filter removed.
• After washing, be sure to
attach the cleaning liquid
filter.
3. Gently wipe off any beard trimmings
attached to the inside of the cleaning tray
with a cloth or tissue paper dampened with
water.
• Clean the corners and uneven parts of the
cleaning tray with a cotton swab
dampened with water.
►When the water does not drain from the cleaning
tray
Beard trimmings may clog the drain at the
bottom of the cleaning tray.
In this case, you cannot clean or dry the shaver.
Push the beard trimmings down through the
drain with a toothpick etc.
Troubleshooting
►Self-cleaning recharger
Problem Action
The blade has not been
thoroughly washed.
If the shaver is not cleaned for
more than 2 weeks, first clean to
remove beard trimmings.
Do not add detergent and water
except when replacing the
cleaning liquid.
Doing so may deteriorate the
cleaning function. (See page 15.)
After cleaning, oil‑like droplets
may remain on the outside of the
foil frame. This is the lubricating
component of the cleaning liquid
and does not indicate a problem.
You may wipe it off with a soft
cloth.
The STATUS lamp glows.
See page 21.
ES-LV95_US.indb 18 2013/07/19 9:45:15