Filter
Top Products
17
English
Replacing the system outer foil and the inner blades
appears on the lamp display once a year. (This will differ
depending on usage.) We recommend checking the system outer
foil and the inner blades when it appears.
Press the power switch for more than 30 seconds to turn off .
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark ( ) to the front,
securely attach the outer foil section to the shaver
until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Align the foil frame mark ( ) and the
system outer foil mark ( ) and securely
attach together.
• The system outer foil cannot be reversely
attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
2
1
1
►Replacing the inner blades
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they
click.
21
►Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑LV95
System outer foil and inner
blades
WES9032
System outer foil WES9173
Inner blades WES9170
Special Detergent for Shaver Cleaning & Charging
System
WES4L03
ES-LV95_US.indb 17 2013/07/19 9:45:14