Filter
Top Products
HOW TO MEASURE WEIGHT ONLY
1. Press the Power Switch to turn the monitor ON.
The CAL symbol blinks on the display, then the display
changes to 0.0 lb.
Wait until 0.0 lb appears on the display.
NOTES:
• If you step onto the monitor before 0.0 lb appears on the
display, an error message “Err” will appear.
• This monitor can be set to either the US or Metric
System. Personal Profile and memory will be displayed
by selected system. To change the US/Metric mode:
1) Keep the UP button pressed until “lb” and “kg” blink on the display.
2) Press the UP or DOWN button to select the desired measurement unit, “lb” or “kg”.
3) Press the SET button to confirm the change.
2. Step onto the Measurement Platform.
Stand with your weight evenly distributed on the
measurement platform.
Remain still and do not mo
ve until the measurement is
complete.
3. Step off the Measurement Platform.
4. Press the Power Switch to turn the monitor off.
32
HBF-500 for FDA 10-26.qxd 10/26/06 4:21 PM Page 32