Omron Healthcare BP652 Blood Pressure Monitor User Manual


  Open as PDF
of 30
 
15
SETTING THE ADVANCED POSITIONING SENSOR (APS)
You can change the options for various settings on your monitor. Pressing the SET
button to change a setting. Press the MEM button to select the options for that setting.
Afterselectingasetting,presstheSTART/STOPbuttontoconrmthesettingandturn
the power off.
SETTING THE POSITIONING INDICATOR
1. Select your User ID.
2. Press the SET button.
NOTE:Thedefaultsettingis“on1”.
3. PresstheMEMbuttontoselectthePositioningindicator“on1”,“on2”,or“oFF”.
on1: After the Positioning indicator lights in blue for more than 2 seconds, or
in orange for more than 5 seconds, measurement starts automatically, even
though the monitor is not in the proper position.
on2: The Positioning indicator lights in blue for more than 2 seconds, measurement
starts automatically.
Measurement will not start if it lights in orange.
oFF: Measurement starts without the Positioning indicator.
User A User B
 previous next