Filter
Top Products
23
6.Handling Errors and Problems
EN
Error Symbol Cause Correction
Cuff over
inflated.
Press the O/I START button
once to turn off the power. Sit
still restart measurement and
keep still and do not talk dur-
ing measurement.
Movement dur-
ing measure-
ment
Wrist is not in
the correct
position.
Carefully read and repeat the
steps in “3.2 Taking a Read-
ing” on p. 14. Make sure that
the setting is set correctly for
the wrist being used to take
the measurement.
The wrist cuff is
not fastened
securely.
Carefully read and repeat the
steps listed under “3.1 Apply-
ing the Wrist Cuff” on p. 12.
This symbol
indicates irreg-
ular or weak
pulses are
detected, but
result can be
considered reli-
able.
Remove the monitor. Wait 2-3
minutes and then take
another measurement.
Repeat the steps in “3.2 Tak-
ing a Reading” on p. 14. If this
error continues to appear,
consult your doctor.
An E mark is
displayed.
Consult your OMRON
retail outlet or distributor.
The battery
power is low.
Replace the batteries with
two new “AAA”
alkaline
(LR03)
batteries.
HEM600-E.book Page 23 Thursday, November 13, 2008 10:26 AM