Filter
Top Products
15
3.Using the Monitor
EN
4. After the monitor has
detected your blood pres-
sure and pulse rate, the cuff
automatically deflates and
your blood pressure and
pulse rate are displayed.
Note: The time and date of
the measurement are
displayed alternately.
5. Press the O/I START button to turn
off the monitor.
If you forget to turn off the monitor, it
will shut itself off automatically after
two minutes.
Important:
Your blood pressure monitor includes an irregular heartbeat
feature. Irregular heartbeats can influence the results of the
measurement. The irregular heartbeat function automatically
determines if the measurement is usable or needs to be
repeated. If the measurement results are affected by irregular
heartbeats but the result is valid, the result is shown together
with the irregular heartbeat display ( ). If the irregular heart-
beats cause the measurement to be invalid, no result is shown.
If the irregular heartbeat display ( ) is shown after you have
taken a measurement, repeat the measurement. If the irregular
heartbeat display ( ) is shown frequently, please notify your
doctor.
Note: Do not use this monitor to measure blood pressure for
more than one person since the measurement values
are automatically stored in memory and an average
value based on the last three measurements is calcu-
lated.
Alternating display
HEM600-E.book Page 15 Thursday, November 13, 2008 10:26 AM