Filter
Top Products
OMEGA Model CYD201/CYD208 User’s Manual
6-2 Options and Accessories
ACCESSORIES
(continued)
MODEL DESCRIPTION OF ACCESSORY
2083-1
Sensor Probe. 12-foot (3.7 m) cable with CY-7-SD-13
sensor in CY mounting adapter, stripped ends. Tempera-
ture limit: 325 K (52 °C). Diode sensor epoxied (Stycast)
into center of 0.564 inch (1.43 cm) diameter by 0.20 inch
(5 mm) thick copper disk. 30 AWG copper leads anchored
to disk. Mass (excluding leads): 4.3 grams.
2083-2
Sensor Probe. 12-foot (3.7 m) cable with CY-7-SD-13
sensor in CY mounting adapter, with 4-pin CYD201-MC
mating connector. Temperature limit: 325 K (52 °C). Diode
sensor epoxied (Stycast) into center of 0.564 inch (1.43
cm) diameter by 0.20 inch (5 mm) thick copper disk. 30
AWG copper leads anchored to disk. Mass (excluding
leads): 4.3 grams.
2084
Multi-Connector Adapter. Required with Model CYD208
when using multiple probe/cable assemblies and Model
201-MC mating connectors.
CYD208
-DIN
Mounting Adapter for Rack Installation. For installation in
a
¼
panel EIA rack space. See Figure 2-3.
6.2 MODEL CYD201/CYD208 WIRES
LSCI P/N DESCRIPTION OF CABLE
9001-005
Quad-Twist™ Cryogenic Wire.
Two twisted pairs,
phosphor-bronze wire, 36 AWG, 0.127 mm (0.005 inch)
diameter.
9001-006
Duo-Twist™ Cryogenic Wire.
Single twisted pair,
phosphor-bronze wire, 36 AWG, 0.127 mm (0.005 inch)
diameter.
9001-007
Quad-Lead™ Cryogenic Wire
. Phosphor-bronze wire,
flat, 32 AWG, 0.203 mm (0.008 inch) diameter.
9001-008
Quad-Lead™ Cryogenic Wire
. Phosphor-bronze wire,
flat, 32 AWG, 0.127 mm (0.005 inch) diameter.
—
Any quality dual shield twisted pair wire for dewar to
Model CYD201/CYD208 connector.