Filter
Top Products
14 The Tool Compensation
83
Fig. 14.4-9
NC command G45 XI0 D1 G46 XI0 D1 G45 XI-0 D1 G46 XI-0 D1
displacement x=12 x=-12 x=-12 x=12
A tool radius compensation applied with one of codes G45...G48 is also applicable with ¼ and ¾
circles, provided the centers of the circles are specified at address I, J or K.
An example: D1=10
N1 G91 G46 G0 X40 Y40 D1
N2 G47 G1 Y100 F180
N3 G47 X40
N4 Y-40
N5 G48 X60
N6 Y40
N7 G47 X20
N8 G45 Y–0
N9 G46 G3 X40 Y–40 I40
N10 G45 G1 X0
N11 G45 Y–20
N12 G45 G2 X–40 Y–40 I–40
N13 G45 G1 X–120
N14 G46 G0 X–40 Y–40