Filter
Top Products
2 Controlled Axes
18
The rotational axes are always provided with degrees as units of measure.
The input increment system of the control is regarded as the smallest unit to be entered. It can be
selected as parameter. There are three systems available - IS-A IS-B and IS-C. The increment
systems may not be combined for the axes on a given machine.
Having processed the input data, the control system will provide new path data for moving the axes.
Their resolution is always twice the particular input increment system. It is termed the output
increment system of the control.
Thus the input increment system of the control is determined by the resolution of the encoder.
Increment system Min. unit to be entered Max. unit to be entered
IS-A
0.01 mm 999999.99 mm
0.001 inch 99999.999 inch
0.01 degree 999999.99 degree
IS-B
0.001 mm 99999.999 mm
0.0001 inch 9999.9999 inch
0.001 degree 99999.999 degree
IS-C
0.0001 mm 9999.9999 mm
0.00001 inch 999.99999 inch
0.0001 degree 9999.9999 degree