Filter
Top Products
MAINTENANCE
\
1. Unzip the zipper at the bottom of the balloon and roll
the balloon up to expose the lamp. See Figure 26.
Figure 26. Exposing Balloon
2. Release the lamp guard locking tabs. See Figure 27.
Figure 27. Removing Lamp Guard
Never attempt to replace lamp in a wet place. The
possibility exists of electric shock.
Always allow sufficient time for the lamp to
cool down before replacing. The possibility
exists of severe burns if hot lamp is
touched.
Always shutdown power source and remove balloon
assembly from mast when replacing a broken lamp.
Utmost care should be taken in handling broken lamp.
The possibility exists of serious injury from handling a
broken lamp.
ZIPPER
BALLOON
ENVELOPE
LOCK
TAB
LAMP
GUARD
LOCK
TAB
3. Remove the lamp guard (Figure 28).
Figure 28. Lamp Guard Removal
4. Press tabs on the lamp holder and lift up holder to
release lamp. Remove the lamp from the lamp socket
by turning lamp counterclockwise. See Figure 29.
Figure 29. Removing Lamp
5. Install new lamp into socket and turn lamp in a
clockwise direction until tight. See Figure 30. Press
tabs on the lamp holder and slowly bring down the
holder to secure lamp in place.
Figure 30. Installing New Lamp
LAMP
GUARD
LAMP
HOLDER
LAMP
SOCKET
LAMP
SOCKET