SAFETY INFORMATION
If lighting system is equipped with a transport lifting hook,
refer to the following safety information.
Before lifting, make sure that lighting system parts are
not damaged and screws are not loosened or lost.
ALWAYS make sure crane or lifting device has been
properly secured to lifting hook of the equipment.
lift the equipment while lighting system is
running.
Make sure the mast is completely lowered before lifting
the lighting system.
Use adequate lifting cable (wire or rope) of suffi cient
strength.
Use one point suspension hook and lift straight upwards.
Never allow any person or animal to stand underneath the
equipment while lifting.
lift machine to unnecessary heights.
If lighting system is not equipped with a transport lifting
hook and the mast is removable, refer to the following
safety information.
Before lifting, make sure that the mast and lamp are
removed as described in the manual.
The cart can be safely lifted by two persons to the
transport vehicle.
NOTICE
When transporting the lighting system, if applicable,
always place in
and place mast in its
carrying case.
ALWAYS
remove balloon/lamp assembly from the mast
when transporting lighting system. This will prevent
damage to the bulb due to vibration.
leave the balloon/lamp exposed during transport.
Exposure to excess wind or rain could damage the
balloon’s nylon cover.
ALWAYS
place balloon inside its protective cover during
transport. Be sure the cover is secured tightly around the
balloon/lamp assembly.