Filter
Top Products
173
APPENDICES
A
Appendix 1 Parameters for a Multiple CPU System
Appendix 1.1 List of parameters
(2) For Universal model QCPU
The following table lists PLC parameters need to be set for a Universal model QCPU.
PLC parameter
Setting
*1
Consistency
*2
Reference
I/O
Assignment
I/O Assignment
Type -
QnUCPU User's
Manual (Function
Explanation, Program
Fundamentals)
Model Name - -
Points -
Start XY -
Base Setting
Base Model Name - -
Power Model Name - -
Extension Cable - -
Slots -
Switch Settings - -
Detailed Settings
Error Time Output Mode - -
PLC Operation Mode at H/W Error - -
I/O Response Time - -
Control PLC Page 80, Section 4.2.2
PLC System Points Occupied by Empty Slot -
QnUCPU User's
Manual (Function
Explanation, Program
Fundamentals)
Multiple CPU
Setting
No. of PLC Page 80, Section 4.2.2
Host Station -
Page 24, Section 2.1,
Page 80, Section 4.2.2
Operation Mode
Page 80, Section 4.2.2
Multiple CPU Synchronous Startup Setting
*4
Online Module Change
*4
All CPUs Can Read All Inputs
All CPUs Can Read All Outputs
Multiple CPU high
Speed
Transmission Area
Setting
*4
Use Multiple CPU High Speed
Transmission
CPU Specific Send Range
Auto Refresh
Points
Start -
Advanced Settings
System Area
*3
-
Communication
Area Setting
(Refresh setting)
CPU Specific Send Range
/
*5
PLC Side Devices -