Filter
Top Products
4
PROGRAMING-MAIN MENU
Switch 0n…
Micronics Ltd.
PORTAFLOW
204+3 V1.04
Press Enter to start
Main Menu
Press SCROLL up or down to move cursor
to the required option and press ENTER to
select.
MAIN MENU
Quick start
View/Edit Site Data
Sensor set
Data Logger
Set up RS232
Set up Instrument
Read flow
Main Menu - Quick Start
Selecting quick start allows the user to
start entering application information. If the
instrument has been used previously, it
stores the last application data entered. If
the unit is to be used on the same
application the user can scroll immediately
to Read flow on the menu, and press
enter without spending time entering new
data.
If the unit is to be used on a new
application select QUICK START and
proceed with the following routine. Use the
scroll keys to select, and then press
ENTER.
QUICK START
Dimension units?
mm
Inches
The instrument now asks for the Pipe
outside diameter? After entering the
outside diameter in millimetres press
ENTER.
QUICK START
Dimension units mm
Pipe O.D.? 58.0
Pipe wall thickness now appears on the
display. Enter the pipe wall thickness in
millimetres, then press ENTER.
QUICK START
Dimension units MILLIMETRES
Pipe O.D.? 58.0
Wall thick? 4.0
Pipe lining thickness now appears on
the display. If the pipe you are measuring
has a lining, enter the Pipe lining
thickness. If nothing is entered the
instrument automatically assumes there is
no lining. Press ENTER to move on.
QUICK START
Dimension units MILLIMETRES
Pipe outside diameter? 58.0
Wall thick? 4.0
Lining? 0.0
The instrument now displays Select pipe
wall material. Using the scroll keys select
from the options available and press
ENTER.
QUICK START
Select pipe wall material:
Mild Steel
S’ less Steel 316
S’ less Steel 303
Plastic
Cast Iron
Ductile Iron
Copper
Brass
Concrete
Glass
Other (m/s)
Note: The following will only be displayed
if a lining thickness had been entered
previously. Use the scroll keys to select
the required material, and then press
ENTER. If Other is selected, enter the
sound speed of the lining in metres/sec.
QUICK START
Select pipe lining material:
Steel
Rubber
Glass
Epoxy
Concrete
Other (mps)