Filter
Top Products
Operation Trucklift
D1 3602BA1-GB03 11
4.3 Driving onto the Lift
The control console is mounted on lifting column 1.
The main switch is on the side of the console. Turn
this switch to position
1
to turn on the power. The lift is
then ready for operation.
The main switch doubles as the
emergency off switch. In emergencies, simply turn
the switch to the 0 position to switch off the lift!
0
1
Remove all tools, chocks, stands etc. from the
working area of the lift.
Always make sure that the working area is
kept free of excessive dirt!
Lower the lift (see Lowering) until it stops
automatically in its starting position.
1.
2.
Drive the vehicle onto the lift tracks and stop so that it
is centred between the end columns.
The vehicle tracks of the lift must be
adjusted to match the track width of the
vehicle.
The actual gross weight of the vehicle should
never exceed the maximum rated load of 8 t.
Secure the vehicle so that it can't roll away
(motor off, hand brake on, gear engaged,
chocks under the wheels).
= =