Filter
Top Products
31
After three seconds, the 14-day average will
be replaced by the most recent test result
with date and time. Press the C button once
and the next most recent test result will
appear. Each time you press and release
the C button, the meter will recall up to
your last 150 test results in order. When the
memory is full, the oldest result is dropped
as the newest is added. To move through
the tests in memory more quickly, press
and hold the C button. Control solution
test results will appear on the display with
“Ë ˘”.
Recall Test Results.
STEP 2
Note: You can enter the memory mode from the test mode.
After completing a blood glucose or control solution test and
while the test result is still on the display, press the M button.
This will put the meter into the memory mode.
Note: When using the meter for the first time, “˘Q”
will appear, showing that there are no test results in memory.
DCO_05265303A_OTFT_OB_CAN_EN 2/2/04 2:39 PM Page 31