Filter
Top Products
14
Insert a test strip, contact bars end first
and facing up, into the test port. (Contact
bars must be inserted all the way into
the meter or you may get an inaccurate
test result.) The meter will turn on
automatically. All segments will appear
briefly on the display followed by the
date and time. Then “
Ê
C
”
(example) is displayed, followed by the
R
symbol. Be sure the code number on
the display matches the code number on
the test strip vial. If the code numbers do
not match, code the meter correctly.
After the
R
symbol appears on the
display, press and hold the C button until
“
Ë
” begins flashing on the display.
When you see the “
Ë
” sign, release the
C button. With the “
Ë
” sign on the
display, the meter will mark your next
test in memory as a control solution test.
Insert Test Strip.
STEP 1
How to do a control solution test:
NOTE: You cannot perform a control solution test until you
have set up the meter completely (see pages 8–10).
DCO_05265303A_OTFT_OB_CAN_EN 2/2/04 2:39 PM Page 14