Filter
Top Products
Step 2: Clean Test Strip Holder
Wash the Test Strip Holder with
soap and water.
Clean the underside of the Test Strip
Holder and check the small hole for
any dirt, blood, or lint. Rinse well.
Dry completely with a soft cloth or
tissue.
Step 3: Clean Test Area
The following cleaning agents will
damage the Meter.
DO NOT USE:
■
Alcohol
■
Cleansers with ammonia or phenol
■
Windex
®
or other glass cleaners
■
Abrasive cleansers
CAUTION: DO NOT GET
WATER INSIDE THE METER.
57
LSI-97-050 OTB Eg 7/25/97 11:09 PM Page 57