Filter
Top Products
You must use the Check Strip:
■
At least once a day.
■
After cleaning the Meter.
■
Whenever your results are not
consistent with how you feel, or
when you think your results are
not accurate.
■
Whenever this message appears:
A 2.1
(example)
Anotok
redo A
Cleaning and Maintaining the
Check Strip
■
Make sure both sides of the Check
Strip are clean. If not, wipe with a
soft cloth or tissue dampened with
water. Dry completely.
■
Do not put blood, alcohol, Control
Solution, or any other fluid (except
water) on the Check Strip.
■
Do not scratch the Check Strip.
■
Do not leave the Check Strip in
sunlight for long periods of time.
CAUTION: If your Check Strip
result falls outside the printed
range, the Meter is not working
properly. DO NOT use the Meter
to test your blood until you get a
Check Strip reading that is within
the printed range. For assistance,
call LifeScan Technical Services.
16
LSI-97-050 OTB Eg 7/25/97 11:09 PM Page 16