Filter
Top Products
The Test Spot should be white or
ivory-colored, with no tears or
wrinkles.
When
insert
strip
appears, slide the notched end of the
Test Strip into the Holder with the
Test Spot side up. Make sure you
push the Test Strip all the way into
the Holder until it stops.
wait
appears for a few seconds. Then,
apply
sample
appears until you apply blood to the
Test Spot (or for 5 minutes).
insertinsert
Test Spot
32
LSI-97-050 OTB Eg 7/25/97 11:09 PM Page 32