Filter
Top Products
Step 3:
When
insert
side 2
appears, turn the
Check Strip over
and slide it back
into the Test Strip
Holder, notched end
first, Side 2 (white)
facing up. The Meter
counts down from
4 to 0, then
A 4 . 4
(example)
A ok
appears if the number falls within
the acceptable Check Strip range.
The Meter automatically tells you if
your reading falls within the correct
Check Strip range. (The range is also
printed on the back of the Meter.)
These messages will continue to
display until you turn the Meter off
or for 2 minutes, when the Meter
automatically turns off.
side 2
2
✔
14
LSI-97-050 OTB Eg 7/25/97 11:09 PM Page 14