Filter
Top Products
Leica IC80 HD Manual 32
SETUP CAM (Camera Settings)
Main menu Submenu
SET DATE TIME
RESET CAMERA PRESS OK
PRESS OK
UPDATE EPROM PRESS OK
CAM LOGO PRESS OK
CAM MODE PCMODE
COLOR
EXPOSURE
RESOLUTION
SETUP CAM
SETUP USER
The camera settings enable you to control internal parameters such
as the date or time, update the firmware or reset the camera. You can
also switch the camera from stand-alone to PC mode (or vice versa).
SET DATE TIME
This command sets the date and time as well as the format for display-
ing them. The following formats are available for selection: YYMMDD –
DDMMYY – MMDDYY
RESET CAMERA
This command resets the camera to the factory settings. All user informa-
tion (such as white balance, resolution etc.) is reset.
UPDATE EPROM (rmware update)
Allows you to update the rmware via the SD card. Refer to the manual
you received along with the rmware le.
CAM LOGO (camera information)
Shows the following on the monitor: Leica logo, histogram, date/time and
image counter.
CAMERA MODE
Toggles between the PC and stand-alone modes. You can also toggle
between PC and stand-alone mode by pressing the black button for more
than 5 sec until a message appears on the screen.