Filter
Top Products
Leica IC80 HD Manual 25
The image cannot be output via both the
HDMI and analog ports simultaneously.
The HDMI port always has priority. To output
the image via the analog port, you have to
remove the HDMI cable from the camera.
Connection
1. Plug the power cable into the correspon-
ding connector on the rear side of the Leica
IC80 HD and the other end into a suitable
power socket.
2. Plug the video cable into the "Video"
port on the rear side of the Leica
IC80 HD and the other end into the analog
port of the device (projector, monitor,
recorder etc.).
Changing the video standard
If you see a distorted image or no image
at all on your analog device, you may
have to change the video standard.
1. To change between the "PAL" and "NTSC"
video standards, carefully press the toggle
button once using the tip of a pen or
pencil.
Analog Video Display without a Computer